Logging workers harvest thousands of acres of forests each year for the timber that provides the raw material for countless consumer and industrial products. The timber-cutting and logging process is carried out by a logging crew. A typical crew might consist of one or two tree fallers or one tree harvesting machine operator to cut down trees, one bucker to cut logs, two logging skidder operators to drag cut trees to the loading deck, and one equipment operator to load the logs onto trucks.
Fallers, commonly known as tree fallers, cut down trees with hand-held power chain saws or mobile felling machines. Using gas-powered chain saws, buckers trim off the tops and branches and buck (cut) the resulting logs into specified lengths. Choke setters fasten chokers (steel cables or chains) around logs to be skidded (dragged) by tractors or forwarded by the cable-yarding system to the landing or deck area, where the logs are separated by species and type of product, such as pulpwood, saw logs, or veneer logs, and loaded onto trucks. Rigging slingers and chasers set up and dismantle the cables and guy wires of the yarding system. Log sorters, markers, movers, and chippers sort, mark, and move logs, based on species, size, and ownership, and tend machines that chip up logs.
Logging equipment operators use tree harvesters to fell the trees, shear the limbs off, and then cut the logs into desired lengths. They drive tractors mounted on crawler tracks and operate self-propelled machines called skidders or forwarders, which drag or transport logs from the felling site in the woods to the log landing area for loading. They also operate grapple loaders, which lift and load logs into trucks. Some logging equipment operators, usually at a sawmill or a pulp-mill woodyard, use a tracked or wheeled machine similar to a forklift to unload logs and pulpwood off of trucks or gondola railroad cars. Some newer, more efficient logging equipment has state-of-the-art computer technology, requiring skilled operators with more training.
Log graders and scalers inspect logs for defects, measure logs to determine their volume, and estimate the marketable content or value of logs or pulpwood. These workers often use hand-held data collection devices to enter data about individual trees; later, the data can be downloaded to a central computer.
Other timber-cutting and logging workers have a variety of responsibilities. Some hike through forests to assess logging conditions. Some clear areas of brush and other growth to prepare for logging activities or to promote the growth of desirable species of trees.
Most crews work for self-employed logging contractors who have substantial logging experience, the capital to purchase equipment, and the skills needed to run a small business successfully. Many contractors work alongside their crews as supervisors and often operate one of the logging machines, such as the grapple loader or the tree harvester. Some manage more than one crew and function as owner-supervisors.
Although timber-cutting and logging equipment has greatly improved and operations are becoming increasingly mechanized, many logging jobs still are dangerous and very labor intensive. These jobs require various levels of skill, ranging from the unskilled task of manually moving logs, branches, and equipment to skillfully using chain saws to fell trees, and heavy equipment to skid and load logs onto trucks. To keep costs down, many timber-cutting and logging workers maintain and repair the equipment they use. A skillful, experienced logging worker is expected to handle a variety of logging operations.
Logging jobs are physically demanding and can be hazardous. Workers spend all their time outdoors, sometimes in poor weather and often in isolated areas. The increased use of enclosed machines has decreased some of the discomforts caused by inclement weather and has generally made logging much safer. Workers in some sparsely populated western States and northern Maine commute long distances between their homes and logging sites. A few logging camps in Alaska and Maine house workers in bunkhouses. In the more densely populated eastern and southern States, commuting distances are shorter.
Most logging occupations involve lifting, climbing, and other strenuous activities, although machinery has eliminated some heavy labor. Loggers work under unusually hazardous conditions. Falling branches, vines, and rough terrain are constant hazards, as are the dangers associated with tree-felling and log-handling operations. Special care must be taken during strong winds, which can even halt logging operations. Slippery or muddy ground, hidden roots, or vines not only reduce efficiency, but also present a constant danger, especially in the presence of moving vehicles and machinery. Poisonous plants, brambles, insects, snakes, heat, humidity, and extreme cold are common conditions where loggers work. The use of hearing protection devices is required on logging operations because the high noise level of felling and skidding operations over long periods may impair one's hearing. Workers must be careful and use proper safety measures and equipment such as hardhats, eye and ear protection, safety clothing, and boots to reduce the risk of injury.
| 1. | Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls. |
| 2. | Appraise trees for certain characteristics, such as twist, rot, and heavy limb growth, and gauge amount and direction of lean, in order to determine how to control the direction of a tree's fall with the least damage. |
| 3. | Saw back-cuts, leaving sufficient sound wood to control direction of fall. |
| 4. | Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers. |
| 5. | Measure felled trees and cut them into specified log lengths, using chain saws and axes. |
| 6. | Assess logs after cutting to ensure that the quality and length are correct. |
| 7. | Determine position, direction, and depth of cuts to be made, and placement of wedges or jacks. |
| 8. | Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges. |
| 9. | Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes. |
| 10. | Select trees to be cut down, assessing factors such as site, terrain, and weather conditions before beginning work. |
| 11. | Maintain and repair chainsaws and other equipment, cleaning, oiling, and greasing equipment, and sharpening equipment properly. |
| 12. | Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling. |
| 13. | Tag unsafe trees with high-visibility ribbons. |
| 14. | Secure steel cables or chains to logs for dragging by tractors or for pulling by cable yarding systems. |
| 15. | Load logs or wood onto trucks, trailers, or railroad cars, by hand or using loaders or winches. |
| 16. | Mark logs for identification. |
| 17. | Work as a member of a team, rotating between chain saw operation and skidder operation. |
| 18. | Place supporting limbs or poles under felled trees in order to avoid splitting undersides, and to prevent logs from rolling. |
| 19. | Split logs, using axes, wedges, and mauls, and stack wood in ricks or cord lots. |
[Back to Top]